BECK SMC02
- Commodity name: BECK SMC02
- Details
-
BECK SMC02 resin is specially fomulated for SMC/BMC application. The main raw materials is isophthalic/NPG. It was diluted in styrene monomer. It has high-reactivity, good mechanical and stable thicknable properties. With FL-LPA Low Profile Additive, BECK SMC02 resin can get classA surface. It was widely used in parts for automobile, electrical part and construction etc.
Properties of BECK SMC02 resin(specifications)
(Viscosity and reactivity undergo slight changes in the course of prolonged storage)Property
Value
Unit
Test method
Appearance
Clear
Acid value
9.5-17.5
mgKOH/g
GB/T 2895 -2008
Non-volatile matter
62-68
%
GB/T 7193 - 2008
Viscosity at 25℃
1.43-2.39
Pa.s
GB/T 7193 - 2008
Stability at 80℃
24
H
GB/T 7193 - 2008
Typical cured function
Unit Test Method
25℃ water bath, 2ml MEKP, 4mlCo2+ 100 g resin
Gel time 3.43-6.37 min GB/T 7193-2008
80℃ water bath, 1g BPO,+ 100 g resin
Gel time 9.60-17.84 min GB/T 7193-2008
65℃-Tmax 6.85-12.70 min
Tmax 220-240 ℃Properties of cured BECK SMC02 resin(typical values)
(Determined on unreinforced and unfilled specimens)Property
Value
Unit
Test method
Appearance
No defect
Barcal Hardness
50
GB/T 3854-2005
H.D.T.
130
℃
GB/T 1634-2004
Elongation of break
2.0
%
GB/T 2567-2008
Tensile Strength
65
Mpa
GB/T 2567-2008
Tensile Modulus
3400
Mpa
GB/T 2567-2008
Flexural Strength
120
Mpa
GB/T 2567-2008
Flexural Module
4000
Mpa
GB/T 2567-2008
Impact Strength
9.0
KJ/m2
GB/T 2567-2008
HANDLING:
BECK SMC02 resin contains ingredients that could be harmful if mishandled. Contact with skin and eyes should be avoided and necessary protective equipment and clothing should be worn.STORAGE:
Drums-store at temperatures below 25℃. Storage life decreases with increasing storage temperature. Avoid exposure to heat sources such as direct sunlight or steam pipes.SHELF LIFE:
This product has a limited shelf life. When stored in accordance with the above conditions, this product has an average shelf life of three months.
The test is according to GB.
The information submitted in this publication is based on our current knowledge and experience. In view of the many factors that may affect processing and application, these data do not relieve processors from the responsibility of carrying out their own test and experiments; neither do they imply any legally binding assurance of certain properties or of suitability for a specific purpose. It’s the responsibility of those to whom we supply our products to ensure that proprietary rights and existing laws and legislation are observed.
Key words:
BECK SMC02
Get A Quote
Note: Please leave your email address, our professionals will contact you as soon as possible!
Related Products