BECK BMC02

BECK BMC02 resin is specially formulated for BMC application. The main raw materials is isophthalic/NPG. It was diluted in styrene monomer. It has high-reactivity, good mechanical and stable thicknable properties. With FL-LPA Low Profile Additive, BECK BMC02 resin can get class A surface. It was widely used in parts for automobile, electrical part and construction etc.

Properties of BECK BMC02 resin(specifications)
(Viscosity and reactivity undergo slight changes in the course of prolonged storage)

Typical cured function
Unit                   Test Method
25℃ water bath, 2ml MEKP, 4mlCo2+ 100 g resin
Gel time                    3.71-6.89                min                  GB/T 7193-2008
80℃ water bath, 1g BPO,+ 100 g resin
Gel time                    8.75-16.20            min                  GB/T 7193-2008
65℃-Tmax                9.10-16.90            min    
Tmax                    210-230                ℃

Properties of cured BECK BMC02 resin(typical values)
(Determined on unreinforced and unfilled specimens) 

HANDLING:
BECK BMC02 resin contains ingredients that could be harmful if mishandled. Contact with skin and eyes should be avoided and necessary protective equipment and clothing should be worn.

STORAGE:
Drums-store at temperatures below 25℃. Storage life decreases with increasing storage temperature. Avoid exposure to heat sources such as direct sunlight or steam pipes. 

SHELF LIFE:
This product has a limited shelf life. When stored in accordance with the above conditions, this product has an average shelf life of three months.

The test is according to GB.
The information submitted in this publication is based on our current knowledge and experience. In view of the many factors that may affect processing and application, these data do not relieve processors from the responsibility of carrying out their own test and experiments; neither do they imply any legally binding assurance of certain properties or of suitability for a specific purpose. It’s the responsibility of those to whom we supply our products to ensure that proprietary rights and existing laws and legislation are observed.